Skip to content
ProductsSolutionsAboutContactLab AutomationPast CasesBilibiliTaobao Shop
Gen3 Series
Address
Product Center > Kinova > Gen3 Series

Gen3 Series

Gen3 Lite

Gen3 Lite

Six-axis lightweight arm with a 0.5 kg rated payload and 760 mm reach.

Inquire about this variant
Full technical details
Degrees of freedom
6
Mid-range payload
600 g
Full-range payload
500 g
Reach
760 mm
Weight
5.4 kg
Linear speed
250 mm/s
Ingress protection
IP22
Operating temperature
0°C ~ 40°C
Power consumption
20 W (average)
Control loop
1 kHz closed loop
Setup time
Under 10 minutes

Portable and quick to set up

  • 5.4 kg weight and installation in under 10 minutes
  • 760 mm reach, 500 g mid-range payload and 250 mm/s linear speed
  • Carbon fiber and aluminum construction with controllers embedded in actuators

Open software platform

  • C++ / Python control interfaces
  • ROS 2 support and Kinova ROS packages
  • USB, Ethernet and Wi-Fi connectivity

Education and rapid prototyping

  • Modular, customizable design
  • Protection zones for safe operation
  • Suited to university teaching labs and small research teams
Gen3 6 DoF

Gen3 6 DoF

Six-axis Gen3 robotic arm with a 4 kg catalog payload.

Inquire about this variant
Full technical details
Degrees of freedom
6
Continuous mid-range payload
4.0 kg
Continuous full-range payload
2.0 kg
Reach
891 mm
Weight
7.2 kg
Repeatability
±0.15 mm
Linear speed
500 mm/s
Ingress protection
IP33
Operating temperature
-30°C ~ 35°C
Power consumption
36 W (average)
Control loop
1 kHz closed loop

Lightweight 6-axis configuration

  • Carbon fiber and aluminum construction, 7.2 kg weight and 4 kg mid-range payload
  • 891 mm reach, ±0.15 mm repeatability and 500 mm/s linear speed
  • Unlimited rotation and integrated torque sensors at every joint

Shared Gen3 hardware and software ecosystem

  • Same Ethernet, USB, Wi-Fi, Bluetooth and HDMI connectivity as the 7-DOF version
  • Same compatibility with Robotiq grippers and vision modules
  • 24 VDC supply, 36 W average consumption and IP33 protection

Integration in confined spaces

  • 1 kg lighter than the 7-DOF version for mobile robots and glovebox operations
  • Full control-interface, ROS 2, MoveIt and Gazebo support
  • Xbox controller and transport case included
Gen3 7 DoF

Gen3 7 DoF

Seven-axis Gen3 robotic arm with a 4 kg catalog payload.

Inquire about this variant
Full technical details
Degrees of freedom
7
Continuous mid-range payload
4.0 kg
Continuous full-range payload
2.0 kg
Reach
902 mm
Weight
8.2 kg
Repeatability
±0.15 mm
Linear speed
500 mm/s
Joint rotation
Unlimited rotation on all joints
Ingress protection
IP33
Operating temperature
-30°C ~ 35°C
Power consumption
36 W (average)
Material
Carbon fiber + aluminum alloy
Control loop
1 kHz closed loop

Redundant 7-axis configuration

  • Carbon fiber and aluminum construction, 8.2 kg weight, 4 kg mid-range and 2 kg full-range payload
  • 902 mm reach, ±0.15 mm repeatability and 500 mm/s linear speed
  • Integrated joint torque sensors with 1 kHz closed-loop low-level control

Connectivity and expansion

  • Two 100 Mbps Ethernet ports, USB, Wi-Fi 802.11a/b/g/n and Bluetooth 4.0
  • HDMI 1.4a, RS-485, three I2C, three UART and GPIO interfaces
  • Robotiq 2F-85/2F-140 support and optional Intel RealSense vision module

Research software ecosystem

  • Web application and C++ / Python control interfaces
  • Native ROS 2 support via ros2_kortex, with MoveIt and Gazebo simulation
  • 3D safety zones, collision avoidance and collaborative safety design