Skip to content
ProductsSolutionsAboutContactLab AutomationPast CasesBilibiliTaobao Shop
Sharpa Wave Series
Address
Product Center > Sharpa > Sharpa Wave Series

Sharpa Wave Series

Sharpa Wave

Sharpa Wave

Five-finger dexterous hand, 22 active DoF, 1.3kg, 208×90×50mm, 20N fingertip force, 150N grip force, 40kg payload, 240×240 tactile resolution @180fps

Inquire about this variant
Full technical details
Weight
1.3 kg
Dimensions
208 mm × 90 mm × 50 mm
Active DOF
22
Drive system
22 in-house actuator modules
Lateral range of four fingers
±20°
Minimum grasp diameter
10 mm
Payload
40 kg
Grip force
150 N
Fingertip force
20 N
Operating frequency
4 Hz
Operating voltage
18–28 V
Static current
0.75 A @ 20 V
Operating temperature
0°C to 45°C
Fingertip position repeatability
±1 mm
Rated service life
Over 1,000,000 cycles
Tactile resolution
240×240
Force resolution
0.02 N
Maximum tactile load
50 N
Force detection range
0–30 N
Spatial resolution
1 mm
Frame rate
180 fps
Raw image output
Supported
Inference mode
Host + onboard inference
Tactile sensor life
Over 100,000 presses

22 active degrees of freedom

  • Palm-width-to-hand-length ratio of approximately 0.618 for human-sized tools
  • Anthropomorphic design with 22 active DOF
  • ±20° lateral movement of four fingers and 10 mm minimum grasp diameter

Dynamic Tactile Array (DTA)

  • Fingertips sense pressure, slip, force changes and contact position
  • Closed-loop adaptation adjusts grip, pose and force as objects move, deform or become occluded
  • Six-axis force/torque sensing with 20 ms latency

Reliability and development ecosystem

  • 2.5 million press cycles, 4,000 m friction travel and 3,200 mechanical shocks at 30 g
  • Protective fist response in 0.10 s and over 1,000 hours of extreme-temperature cycling
  • ROS 2, MuJoCo, Isaac Sim and SharpaPilot SDK
Sharpa Wave SE

Sharpa Wave SE

Streamlined tactile edition of Wave, 22 active DoF, 12N fingertip force, 90N grip force, 24kg payload, 60×60 tactile resolution @30fps, on-board inference

Inquire about this variant
Full technical details
Weight
1.3 kg
Dimensions
208 mm × 90 mm × 50 mm
Active DOF
22
Payload
24 kg
Grip force
90 N
Fingertip force
12 N
Operating frequency
2 Hz
Tactile resolution
60×60
Force resolution
0.05 N
Spatial resolution
2 mm
Frame rate
30 fps
Raw image output
Not supported
Inference mode
Onboard inference
Force detection range
0–30 N
Fingertip position repeatability
±1 mm

Shared Wave mechanical design

  • 22 active DOF, 1.3 kg weight and 208 × 90 × 50 mm dimensions
  • ±20° lateral finger movement and 10 mm minimum grasp diameter
  • Same mechanical reliability tests as Wave

Cost-sensitive integration

  • 60×60 tactile resolution at 30 fps with onboard inference
  • Raw image output is not supported
  • 24 kg payload, 90 N grip force and 12 N fingertip force